Installation Manual

Electric tailgate installation manual for Toyota Innova with original suction lock 2018+ (GOLD & PINK ECU)

ビュー : 2460
著者 : KAIMIAO
更新時間 : 2020-10-19 16:58:33
Electric tailgate installation manual for Toyota Innova with original suction lock 2018+ (GOLD & PINK ECU)

heartPls click here to download installation manual

Installation Precautions:
1. For safety and to ensure the normal use of the product, please install it by a professional installer. Do not disassemble the machine without permission to avoid damage to the machine and accident.
2. Before installing the product, start the engine first, check the function display of the car dashboard, the operation of the buttons in the car is normal, and the surface of the car is not scratched. If you have any questions, please report to car owner in time.
3. Check whether the tailgate opens and closed normally, check whether the lights are normal.
4. Turn off the engine and prepare related tools.
5. Installer should first remove the metal objects and other hard objects on their bodies to prevent damage to the car seat or interior during installation.
6. During the installation process, the removed automobile components should be put away to avoid scratching the instrument panel in the car. Debris left in the wiring should be disposed of in time and not left in the car. The joint must be insulated to prevent short circuit.
7. According to our wiring method, avoid affecting the moving parts of the car during the wiring process, such as the steering wheel drive shaft, accelerator and brake pedal and other vehicle control prats. Each wiring harness needs to be fixed after being routed to prevent it from coming loose.
8. Please connect each wiring harness according to our wiring method (Noted the position of the ground wire).
9. Do not insert or remove the connected plug while the power is on, otherwise the host or accessories may be damaged during plugging and unplugging.
10. If the key fob has a tailgate open button, press this button for 3s to open and close the tailgate. If don’t have, you need to press the unlock button 3 times to open and close the tailgate. If you have any problems, please contact our after-sales: info@kaimiao-group.com



Common Problems:
A. Bracket installing reverse:
The trunk door will not be closed properly.
B. The bracket screws are not replaced as required:
The trunk door will not closed properly and the struts will be damaged.
C. The control box connector is not inserted into the correct position or is loose:
Anti-pinch pressure sensor is not sensitive.
D. Strut ball head and compression springs are not installed properly:
Strut will fall off during us (check it after installation)
E. The connector is not inserted into the correct position or is loose:
Functional failure.
F. The electric suction lock and the lock cannot be deviated, otherwise the door will not be closed and the door gap is too large, resulting in a loud sound.
G. The car has not been started for a long time, resulting in low power:
When the door is opening and closing, the electric tailgate does not work properly and it is necessary to restart the engine.
H. Installing more than 5kg of soundproof cotton on the tailgate, it will affect the switch gate force and need the controller to increase the force.
I. First installation: Press the tailgate closing button for 3-5 seconds to hear a long beep——, then press it again to hear 2 sound “ Deep Deep”. Finally, the installation is successful. (If there is no such operation, the electric tailgate will be abnormal when it is running.)
関連 ニュース
詳しい情報を見る >>
【DS - KM448】【取り付けガイド】【パワーリフトゲート】KIA SORENTO 2021+用 【DS - KM448】【取り付けガイド】【パワーリフトゲート】KIA SORENTO 2021+用
Sep .27.2024
パワー リフトゲートを使用すると、車両の荷物スペースにアクセスする際の利便性が向上します。リフトゲート モデルの特定のコントロールと機能を理解して、その機能を最大限に活用してください。パワー リフトゲートが提供する使いやすさとアクセス性をお楽しみください。
【DS - KM622】【取付ガイド】【パワーリフトゲート】トヨタ ヤリスクロス 2023+用 【DS - KM622】【取付ガイド】【パワーリフトゲート】トヨタ ヤリスクロス 2023+用
Sep .23.2024
全体的に、パワーリフトゲートは、現代の車両の機能性と利便性を高め、ユーザーが荷物を簡単かつ安全に管理できるようにする実用的かつ革新的な機能です。